Table of Contents: [ ]
You entered 192.168.o.1 with the letter “o”. Use 192.168.0.1 with the number zero to access your router's administration page.
The problem with 192.168.o.1
The address 192.168.o.1 looks almost identical to 192.168.0.1, but there is an important difference: it contains the letter O where the number 0 should be.
An IPv4 address is made up of four numeric values separated by dots. Letters are not valid inside an IPv4 address, so 192.168.o.1 cannot be a router IP address.
If you were given 192.168.o.1 as a router login address, the intended address is most likely 192.168.0.1.
Use 192.168.0.1 instead
Check the character immediately before the final dot:
Wrong: 192.168.o.1
Right: 192.168.0.1
The correct version uses the digit zero. This distinction can be easy to miss because uppercase O, lowercase o, and the number 0 can look similar depending on the font or device.
How to open 192.168.0.1 correctly
Connect your phone or computer to the router's Wi-Fi or local network.
Open a web browser such as Chrome, Safari, Edge, or Firefox.
Type 192.168.0.1 directly into the address bar.
Press Enter or Go. If 192.168.0.1 is your router's management address, you should see its login or administration page.
Do not type 192.168.o.1, and avoid entering the address into a search box if you want to connect directly to the router.
192.168.0.1 opens, but I cannot log in
Reaching the login page means the IP address itself is working. If your username or password is rejected, the problem is with the router credentials rather than the address.
Do not assume that every router uses admin/admin. Default credentials vary by manufacturer and model, and the login password may have been changed during installation. Check the label on the router, the manufacturer's documentation, or credentials provided by your internet service provider.
192.168.0.1 does not open either
Correcting the letter O to zero does not guarantee that 192.168.0.1 is the management address of your router. If the page still does not load, first confirm that you are connected to the correct local network.
You can then check your device's default gateway. The gateway address is often the address you need to open to manage the router. Depending on the router and its configuration, it may be 192.168.0.1, 192.168.1.1, or another private address.
If you previously changed the router's LAN address, use the new address instead of the factory default.
Why this typo is so common
Router addresses are often copied from labels, setup guides, screenshots, or messages. In some typefaces, the number 0 can resemble the letter O, leading people to enter 192.168.o.1 by mistake.
A quick way to verify the address is to remember that every section of a standard IPv4 address must be numeric. If you see an O in 192.168.o.1, replace it with 0.
FAQ
Is 192.168.o.1 the same as 192.168.0.1?
No. 192.168.o.1 contains the letter O and is not a valid IPv4 address. 192.168.0.1 uses the number zero and is a valid private IP address that may be used for router administration.
Is 192.168.0.1 written with O or zero?
It is written with the number zero: 192.168.0.1. There are no letters in the address.
Why does typing 192.168.o.1 take me to a search page?
Because 192.168.o.1 is not a valid IPv4 address, a browser may treat what you entered as a search query instead of a local network address. Enter 192.168.0.1 directly in the address bar.
What should I do if 192.168.0.1 shows a login page but my password does not work?
The IP address is working if the router login page appears. Check the router label or manufacturer documentation for the correct credentials, and remember that the administrator password may have been changed during setup.
How can I find my router's IP address if 192.168.0.1 does not work?
Check the default gateway shown in your device's network settings. That address is typically the local router address you need to open in a browser.
English 
French 
German 
Indonesian 
Japanese 
Polish 
Spanish 
Thai