Mini-router mode changes the way you find the device
Regulatory records identify Aceex mini-router hardware from the 802.11n era. A compact unit may be used as a router, access point, repeater or travel-network device depending on firmware. In router mode it may provide DHCP and act as your Default Gateway; in AP or repeater mode it can sit behind another gateway and use a different address.
Use the network role to locate the admin page
If your computer receives an address directly from the Aceex, check its Default Gateway. If another router is the gateway, open that upstream router's client list and look for the Aceex by hostname or MAC address. This is more reliable than cycling through unrelated private IPs.
Travel-router setups can create double-NAT confusion
When a mini router is connected to a hotel, modem or existing router, both devices can perform routing. If the upstream and downstream LANs overlap, the admin page may become difficult to reach. Keep the Aceex LAN on a different subnet from the upstream network when using full router mode.
Change mode carefully
Switching between router, AP and repeater modes can change DHCP behavior and sometimes the management address. Before changing mode, note the current IP and connect by Ethernet if possible. After the reboot, renew the client's network address before assuming the device has failed.
A reset should restore access, not become the first diagnostic step
Because compact routers are often configured for a specific travel or repeater use case, a reset can erase the one setting that made the installation work. First determine the current mode and address. Reset only when the password cannot be recovered and you are prepared to rebuild the connection.
FAQ
Why does an Aceex mini router have different login behavior in AP mode?
In AP or repeater mode it may stop acting as the default gateway and receive a management address from another router.
How can I find it behind another router?
Check the upstream router's DHCP or connected-device list and identify the Aceex by hostname or MAC address.
What is double NAT?
It occurs when both the upstream network and the Aceex are routing. It is not always harmful, but overlapping subnets can make management confusing.
Can changing operating mode change the management IP?
Yes. Mode changes can alter DHCP and addressing behavior, so renew the client connection after the reboot.
Why avoid an immediate reset?
A reset can erase repeater, travel-network or custom LAN settings that may be difficult to reconstruct.
English 
Taiwan